info@osscertification.com
+91-9910060579 | 9818800579

Introduction to Wire and Cable Inspection.

N. Pompi Devi
51 years ago
> Blog > Blog > Introduction to Wire and Cable Inspection.

Any wire or cable plays a critical role in the functioning of our infrastructure assets and tools. As lives and equipment is dependent on the cables and wires, it will be in your best interest to conduct thorough inspection on a regular basis.

Inspections should be carried out in order to have a correct estimation of the life line of the ropes and cables. This is to ensure that their functioning is carried out to the max with proper safety. The results of the inspection should also be recorded for a particular job.

Why is Wire and Cable Inspection Required?

Majority of the time, an imperfection or a defect in wire or a cable can be seen before it becomes an actual problem. A visual inspection of all the cables or wires will be good enough for you to not bear the costs of faulty wires. Moreover, faulty wires and cables creates disruption in your functioning. A wire or a cable which becomes defected during service can curtail production and lead to destruction of machinery and equipment. It can also lead to death of individuals involved.

Wire or cables in continuous use should be checked daily during normal functioning and should be inspected on a weekly basis.

However, cables which have not been in use for a long period of time, say a month, should be inspected and examined thoroughly.

Warning Signs

Most of the time, there are warning signs which indicates or conveys that the cables or wires in use for daily operation should be replaced. These signs include:

a) Wire Breaks

Occasional wire breaks are usually not critical and doesn’t require the need for replacement. However, the severity of the wire breaks also depends on the number of broken wires on the outside of the cable or rope. It is an indication of the condition of the wire or cable and gives you an idea of whether or not the cable or wire should be replaced.

b) Abrasion

The damage to cables or wires caused due to abrasion usually is when a wire or a cable comes in contact with an abrasive medium. Keep in mind the appropriate diameter of the outer wires and look out for flat wires which usually results from friction.

c) Corrosion

In case of corrosion, it is difficult to detect as it occurs internally. The best signs you could look for is lack of lubrication and slight discolouration on the surface of the cable or wire.

d) Bird Caging

In case of bird caging, you have to keep an eye out for strands which open up in cage-like formations. In such cases, the wire or cable must be immediately replaced as the damage cannot be replaced.

e) Diameter

Cables in new conditions must be checked of its diameter in normal operational environments. Diameter reduction of the cables or wires are serious damaging factors. All ropes do stretch and decrease in diameter. Replace the wire or cable if the wear on individual wires exceed 1/3 of the diameter.